The Women’s Hovercraft Split is purpose built to surf the earth and features a directional shape that truly shines in the backcountry. It’s nimble, squat outline provides the float of a much longer board, and the short running length makes it super maneuverable in the tight trees and skinning up. The blunt nose and directional rocker of the Hovercraft keep you surfin’ on top of the soft stuff, while the stiff tail keeps you stable through any unexpected crust. For added edge grip on icy skin tracks or firm descents, the Hovercraft Split features Inner/Outer Traction Tech 2.0 edges. Fresh for 21/22, the Women’s Hovercraft has a new look with a refined Engineered Veneer Topsheet and a black + transparent base plus laser etched topsheet markings that eliminate all solvent inks. Without any inks on the board, not even the sidewalls, the new Women’s Hovercraft is the most sustainably produced board we’ve ever made! We’ve also upgraded the Women’s Hovercraft’s splits clips to the stronger and lighter Karakoram Ultra Clips 1.0.

1. Inside & outside Traction Tech 2.0
Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Inner edge Traction Tech

Inner edge Traction Tech improves splitboard edge grip on ascent. Three sidecut bumps on each side of your binding keep your locked in on icy skin tracks no matter which way you are traversing.

2. Progressive sidecut
At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

3. Quick Tension Tail Clip
Built-in climbing skin tension system using pre-cut notch that eliminates the need for a traditional skin tail clip.

Directional flex pattern
Off set tip-to-tail flex pattern that is designed for directional freeride boards. The nose, center of board and tail are slightly different stiffnesses to help lift the nose, sink the tail and improve stability at speed.

Blunt nose
How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. - Jeremy Jones

V-Core
Jones exclusive wood core profiling that offers a stable and playful board feel. The wood core is softer between the feet for easy turn initiation and stiffer in the nose and tail for stability riding through uneven terrain and landing airs.

Directional Rocker
A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

"My experience is that most falls in freeriding start from the nose of the board – you either go over the bars in powder, the nose gets caught under a weird crust and tosses you, or you hit a hard tranny at the contact point of the tip and get bucked. Directional Rocker eliminates most of these falls." - Jeremy Jones

Built with the finest tech and materials

100% of our adult models feature high-end materials, construction technologies and sustainable manufacturing process. We accept no compromises in producing the most durable and sustainable snowboarding gear.

Base
Sintered 8000 Base
New super durable material made from Ultra High Molecular Weight Polyethylene (UHMW-PE) and carbon. Base is easily repairable, highly wax absorbent and wicked fast.

Wend Natural Wax
Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Flip-Flop Base
Producing two or more base color options minimizes p-tex waste. Order may be filled with either color. Color does not vary by size.
Extra hardware

Karakoram Ultra Clips
Ultra clips are the strongest, lowest profile splitboard clips in the world. They deliver unmatched compression between board halves and they are adjustable so you can maintain even compression as your splitboard ages.

Fiber
Biax fiberglass
A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Bio Resin
Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organic raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes. Bio-resin requires 33% less greenhouse gas emissions to produce than conventional epoxy.

Oversized recycled edges
All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Factory Tuned
All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Forever Flex
Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.

Recycled rounded ABS
Rounded sidewall finish that improves board durability by protecting topsheet from chipping.

Stainless steel reinforcement
Stainless steel plates are embedded into the nose and tail for improved board tip durability.

Topsheet
Engineered Wood Veneer
New composite wood veneer topsheets. Wood veneer topsheets dampen ride and absorb board chatter.

No Ink!Laser engraved graphics
The Hovercraft series now features laser etched topsheet graphics that eliminate toxic inks.

Woodcore
Classic Core
Full wood premium poplar core than offers fun pop, even flex and solid durability.